Coil Coater Directory

In this issue Coil World is pleased to present our

Annual Coil Coaters Capability Directory.

On the next several pages we once again present our 2015 Coil Coaters Capability Guide which we hope will help serve as a very useful directory of domestic and international coil coaters for all of our readers. On these pages we have listed all those companies who have responded to our inquiry of services that are provided by domestic and international coil coaters. This is the most up-to-date list of coil coaters highlighting the various services that they offer. This list has been compiled from the responses that we received from our inquiries. For those coil coaters who failed to respond by our cutoff date, we went under the assumption that there were no changes required from our 2014 Directory listing. If anyone is aware of a coil coating operation that is not included in this year’s directory, we would greatly appreciate it if you will contact Coil World via e-mail at philcola@ optonline.net. We will be certain to include them in our 2016 Directory

AFP Inc.
3730 S. Capitol Avenue Whittier, CA 90601
Tel: 562-699-4550 Fax: 562-699-1552
E-mail: tony@ afpinc.com www.afpinc.com
Contact: Tony Heath, Coil Coating Vice President
Substrates:
Steel Thickness (min/max): 0.008”/0.029” Width (min/max): 14”/ 43″
Coatings: Paint
ALUMINUM
Thickness (min/max): .05″/.60″
Maximum width: 43″
Coating: Paint

Processing capabilities: Two paint lines,
three slitters (maximum width, 52″)
stucco embossing and roll forming roofing panels (A panel,(.0145x 40.875) R panel
(.0185x 42.75) corrugated (.0145x 28) and standing seam.
Additional information: AFP Inc. provides painted coil using HDG, CRS steel, galvalume, zincalume, and aluminum substrates. We can offer single bill invoices, or toll coating.

Alcan Deutschland GMBH
Hannoversche Strasse 1
D-37075 Goettingen, Germany
Tel: ..551 / 340-0
Fax:..551 / 304-324
E-mail: georg.richarz@alcan.com
Contact name: George Richarz, GlobAlcolor Products
Substrates: Aluminum
Thickness (min/max): 0.2mm/3.1mm Maximum width: 2050mm
Coatings—on request: PVDF, polyester, polyamide, polyurethane,epoxy
Processing capabilites:
Annual capacity (metric tonnes): 50,000 Number lines: 1
coil width min: 830mm, coil weight max: 10 tonnes, line speeds max: 200m/min
further captive processing : slitting, sheeting, printing, embossing.
Additional information: Types of products:
Semi-finished products of pre-painted aluminum coils, strips, sheets and cut blanks for use in building, transport and industrial applications. Brand names: Al-Silent, Alukant, EasySign, Falzonal, FF2, FF2 plus, FF3, Signicolor,Transicolor, Ziegonal

Alcoa, Inc.
1480 Manheim PikeLancaster, PA 17601
Tel: 717-207-1207
Fax: 717-295-2222
www.millproducts-alcoa.com
Contact: Dave Hohman, Market Manager, B&C and Consumer Products
E-mail: dave.hohman@alcoa.com
Substrates:
Aluminum
Thickness (min/max): .010/.063 Maximum width: 61”
Coatings: Paint, Pretreat
Processing capabilities: Multi-coat painting, leveling, slitting, embossing and blanking
Additional Information:
Available paint system include acrylics, polyesters, epoxies, polyurethanes, fluorocarbons, textured, conductive and other specialty finishes.
Embossing patterens include stucco, diamond, rustic, cedar, leather grain, and brushed finish

Aleris Rolled Products
25825 Science Park Drive
Suite 400
Cleveland, OH 44122-7392
Tel: 216-910-3400
Fax: 216-910-3650
www.aleris.com
Contact: Kathy Balzer
Email: info@aleris.com
Other locations:
Lewisport
1372 State Road 1957
Lewisport, KY 42351
Tel: 270-295-5228
Fax: 270-295-5238
Email: info@aleris.com
Substrates:
Aluminum
Thickness (min/max): 0.012”/0.072”
Width (min/max) : 30”/60”
Coatings: one or two side full coat applications— single and two-coat paint systems, polyester, acrylic, fluorocarbon, polyurethane, epoxy primers and chrome/tri-chrome pretreatments.
Processing Capabilities:
embossing and slitting to 4″ minimum

Ashville
1 Reynolds Road
Ashville, OH 43103
Tel: 800-521-2930
Fax:800-348-2629
Email: info@aleris.com
Substrates:
Aluminum (Wide Line)
Thickness(min/max) 0.015″/0.060
Width (min/max) 36″/60″
Narrow Line
Thickness (min/max) .015”-.032”
Width (min/max) 10”/24”
Coatings: One or two side full coat applications- single and two-coat paint systems, polyester, acrylic, fluorocarbon, polyurethane, epoxy primers and chrome/non-chrome pretreatments, PVC and polyester intermix system
Clayton:
838 North Delsea, Drive Clayton, NJ 08312
Tel: 800-832-6557
Fax: 800-524-2558 X-5434
Email info@aleris.com
Substrates:
Aluminum
Thickness (min/max) 0.0030”/0.0150”
Width (min/max) 0.35”/48”
Coatings: one and two side applications. Coating types: Thermo-setting vinyl, epoxy, polyesters and gravure
Printing capabilities.
Processing capabilities: slitting and lubricating

Nichols Aluminum, LLC
Davenport 1725 Rockingham Road Davenport, IA 52802
Tel: 563-324-2121
Fax: 563-324-7911
E mail info@aleris.com
Substrates:
Aluminum Thickness (min/max) 0.011”/0.051”
Width (min/max) 21.00”/38.250”
Coatings: one or two side full coat applications- single and two-coat paint systems, polyester, acrylic, epoxy, fluorocarbons, krystal kote, primers, and chrome/non-chrome pretreatments.
Processing capabilities:
slitting and embossing (stucco and diamond)

Nichols Aluminum-Alabama, LLC.
Decatur 2001 Highway 20 West Decatur, AL 35601
Tel: 256-355-1550
Fax: 256-355-5928
Email info@aleris.com
Substrates:
Aluminum Thickness (min/max) 0.0125”/0.079”
Width (min/max) 27.00”/52.50”
Coatings:
one or two side full coat applications- single and two coat paint systems,
polyester, acrylic, epoxy, fluorocarbons, krystal kote, primers, and chrome/non-chrome pretreatments. Processing capabilities:
slitting and embossing (stucco, diamond and rustic cedar patterns available).
Additional Information:
Aleris supplies a wide range of aluminum products and comprehensive, high-end finishing services. Whatever your coated aluminum needs, our in-depth knowledge and experience enable us to provide innovative solutions to meet virtually any challenge.

American Metals, Division of USG Interiors, Inc.
1000 Crocker Road
Westlake, OH 44145
Tel: 440-871-1000
Fax: 440-892-7416
Direct: 440-892-7393
E-mail: gwilcox@usg.com Dwoodard@usg.com
Contact names: Greg Stratton, plant manager; Gary Wilcox, Sales Manager, Doug Woodard, Sales representative. Matt Montgomery, Operations Manager
Substrates:
Aluminum
Thickness (min/max): .010/.050”
Maximum width: 49”
Coatings: Paint, Dry Lube, Pretreatments, Adhesives
Steel
Thickness (min/max): .006/.035
Maximum width: 49”
Coatings: Paint, Dry Lube, Pretreatments
Adhesives
Processing capabilities:
Coil coating-steel, hot dipped galvanized, aluminum, precoated and bare coil slitting—steel, hot dipped galvanized, aluminum. Deoiling, bonderizing, adhesive coatings, and dry lube coating
Paint line: coil coating CRS, HDG, Alum, TP and other substrates. Slitting Line: pre-painted and bare coil slitting. Herr Voss slit line with in-line strand extensioning.
Additional Information: State-of-the-art coil coating operation, excellent safety, environmental, and operational programs

American Nickeloid Company
2900 West Main Street Peru, IL 61354
Tel: 815-223-0373
Fax: 815-223-5344
www.americannickeloid.com
E-mail: johnr@an-co.com
Contact name: John Riva, Corporate Sales Manager
Processing Capabilities:
Continuous Coil Processing of Decorative and Functional Metals.
Plating, Polishing, Coating and Laminating with Full Slitting and Cut-to-length Capabilities.
Slitting
Gauge (min/max) .008” – .108”
Width (min/max) 0.25” – 60”
C-T-L
Length (min/max) 5” – 144”
Width (min/max) 0.1” – 60”
Plate/Polish
Gauge (min/max) .008” – .108”)
Width (min/max) 12” – 37”
Coat and Laminate`
Gauge (min/max) .008” – .097”
Width (min/max) 12” – 60

Arrow Shed, LLC.
Third Avenue Haskell, NJ 07420
Tel: 973-835-3200
Fax: 973-835-1006
www.arrowsheds.com
E-mail: ed.paisker@arrowsheds.com
Contact name: Edward Paisker, Plant Manager
Substrates:
Steel
Thickness (min/max): .0088/.030
Maximum width: 33.50”
Liquid coatings
Processing capabilities:
Tandem lines can process 20,000# raw coils, finished coil maximum weight 10,000#. In-line “flash coat” zinc electroplating, and dried-in-place treatment capability.
Additional information:
Arrow is the world’s leading maker of backyard steel storage buildings. The Haskell, NJ based manufacturer coats, fabricates and produces a large variety of storage buildings ranging from 5’ x 4’ to 14’ x 31’. Selling internationally through major home centers and mass merchants, Arrow buildings offer both galvanized steel and vinyl-coated steel finishes. Arrow continues to be the industry leader in DIY storage building marketplace.

BHP Coated Steel
Springhill Road
Port Kembla, NSW 2505 Australia
Tel: 61 2 42 75 7522
Fax: 61 2 42 75 6694
E-mail: parsons.ray.rt@bhp.com.au
Contact name: Ray Parsons, Chief Technologist
Other locations:
Bayview Road
Hastings, Victoria 3915 Australia
Tel: 61 3 59 790111
Fax: 61 3 59 796258
Substrates:
Aluminum
Thickness: (min/max): 0.01/0.06
Maximum width: 48”
Coatings: Paint
Steel
Thickness (min/max): 0.008/0.06
Maximum width: 62”
Coatings: Laminates/paint
Processing capabilities:
A fully integrated producer of a comprehensive range of rolled, metallic coated and organic finished steel strip products.

Baycoat
244 Lanark Street
Hamilton, Ontario Canada L8E 4B3
Tel: 905-561-0954 ext.220
Fax: 905-560-0189
Contact name: Graham Brown, President/ General Manager
E-mail gbrown@baycoat.com
Substrates:
Steel
Thickness (min/max): 0.008/0.058
Maximum width: 61.5”
Coatings: Paint
Processing capabilities:
Two coil coating lines equipped to coat cold rolled, galvanized or galvalume substrate. In-house slitting services to slit to 10” widths are also available.
Additional information:
Baycoat is an ISO 9001:2008 certified company with more than 45 years experience providing coil coating services for use on a wide range of products. Baycoat offers a full range of exterior and interior paint systems with a variety of surface textures and finishes.

Brightsmith
Coil Coaters 120 Enterprise Avenue
Morrisville, PA 19067
Tel: 215-295-4158
Fax: 215-337-7153
www.brightsmithcoaters.com
Contact: Eric Schulz E-mail eschulz@brightsmithcoaters.com
Substrates:
Aluminum
Thickness (min/max) .014” / .100”
Maximum width: 61”
Steel:
Thickness (min/max) .008” / .070”
Maximum width 61”
Processing Capabilities:
Two and Three color print options warranted and non-warranted, laminating top and bottom, slitting and coating.
Additional Information:
Ability to pre-treat/ paint/laminate CRS, HDG (Zinc phosphate pre-treat), Aluminum, Galvalume (Henkel 1310 pre-treat), TMBP, Stainless, and rail siding capabilities.

Canfield Metal Coating
460 W. Main Street
Canfield, OH 44406
Tel: 330-533-3311, Toll free: 877-264-5262
Fax: 330-533-5741
www.coilcoat.com
Contact: Paul Pirko, Sales/Marketing Manager
E-Mail: ppirko@coilcoat.com
Processing capabilities:
• Single source or toll work electro-galvanizing, pre-painting, and oscillated-wound slitting. We offer high quality and yields, rapid scheduling, and on-time delivery.
• Electro-galvanizing: zinc and custom coatings, zinc phosphate, chromate, anti-fingerprint, tinted acrylic, paper bead adhesive, dry-in-place treatments. Gauge range: .008” through .080”, width range, 24” to 48”. Maximum coil weight 37,400 pounds.
• Painting: polyesters, epoxies, acrylics, modified vinyls, thermo-setting vinyls, and adhesives, Gauge range: .008” to .045”, maximum coil weight 20,000 lbs, paint coil ID 16” to 20”
Additional information:
CMC is continually developing its specialty coating capacity. If you require a coating that we don’t currently provide, we will arrange trial runs.

Centria Coating Services
1005 Beaver Grade Road
Moon Township, PA 15108
Tel: 888-647-4084
Fax: 412-299-8037
E-mail: coatingservices@centria.com
Contact name: Jim Dockey, General Manager
Other Locations:
530 No. Second Street
Cambridge, OH 43725
Tel: 888-611-7351
New Economy Business Park
500 Perth Drive Ambridge, PA 15003
Tel: 412-299-8087
Substrates:
Aluminum
Thickness (min/max): .017”/.080”
Maximum width: 62.5””
Coatings: Paint & Adhesives
Steel
Thickness (min/max): .009/.079
Maximum width: 62.5”
Coatings: Paint & Adhesives
Processing capabilities:
Centria Coil Coating Services paints, slits and embosses all types of metals with all types of coating systems for many different field applications.
Additional information:
Centria Coil Coating Services is a full service coil coating operation, with over 50 years experience in not only coil coating, but also coil processing and pre-paint conversion. We know what systems you need and we can get it for you on time.

Chemcoaters LLC
700 Chase Street
Gary, IN 46404
Tel: 877-411-2905, 219-977-1929
Fax: 219-977-5299
www.chemcoaters.com
E-mail: miket@chemcoaters.com
Contact names: Bill Capizzano, President; Mike Tieri, Director of Sales & Marketing, 708-715-7759
Substrates:
Aluminum
Thickness (min/max): 0.008”/0.120”
Maximum width: 72”
Coatings: Coated Products, CR, stainless, aluminum
Steel
Thickness (min/max): 0.008”/.120”
Maximum width: 72”, 880# coil Coatings: Dry Film Lubricants and pre-paint.
Coatings:
dry film lubes for metal stampings, RoHS compliant coating systems, Intercoat™ Chemguard, slitting, edge trimming.
Additional Information:
The Chemcoaters Green Advantage is the state-of-theart environmental coating line and process, in-house technical service and product development expertise, professional customer service and program administration. CC is a totally green and low cost provider.

Consolidated Metal Products®
650 Rosewood Drive
Columbia, SC 29201
Tel: 800-382-3749 (toll free)
Fax: 800-277-8241
E-mail: tom.white@csisteel.com
Contact name: Tom White, Director of Sales
Substrates:
Aluminum
Thickness (min/max): .014/.080
Maximum width: 24”/62”
Steel
Thickness (min/max): .010/.060
Maximum width: 24”/62”
Processing capabilities:
The most diverse capabilities in our industry include 62” coil coating with in-line Stamco tension leveling, 75” Stamco slitter, 60” Red Bud multi-cut precision blanking, stamping for fabricated parts, embossing (including Seville), and 65,000# / 82” OD coil handling capability
Additional information:
CMP™ offers single bill metal packages and toll processing for both aluminum and steel. Our diverse processing capabilities are unique in the industry and allow us to control service and quality and remove excess costs from the supply chain. Our “Engineered Solutions™” market approach is supported by technical and sales experts in both the United States and Mexico.

Continous Colour Coat Limited
1430 Martingrove Road
Rexdale, Ontario M9W 4Y1 Canada
Tel: 416-743-7980
Fax: 416-743-5980
E-mail: efossen@metalkoting.com
Contact name: Eric Fossen, Senior Vice President
Substrates
Aluminum
Thickness (min/max) .015/.092
Maximum width: 60”
Coatings: Laminates/paint
Steel
Thickness (min/Max): .008/.094
Maximum width: 60”
Coatings: Laminates/paints
Processing capabilities:
Maximum coil size 28,500# 64” OD. We have the capability of painting decorative prints. We also have an electro galvanizing line capable of coating .008”-.080” x 14”-60” with maximum coil weight of 56,000#76″ OD.

Edcoat Limited Partnership
30350 Edison Road
New Carlisle, IN 46552
Tel: 574-654-9105
Fax: 574-654-9106
www.edcoat.com
E-mail: jwilliams@edcoat.com
Contact name: Jeff Williams
Substrates:
Aluminum
Thickness (min/max): .009/.070
Maximum width: 30”
Coatings: Paint
Steel
Thickness (min/max): .006/.030
Maximum width: 30”
Coatings: Paint
Processing capabilities:
Receive up to 25 ton and 62” wide. Slit up to 25 ton and 62” wide. Coat from 10” to 30” wide. Specializes in high temperature coatings, garage door, roofing and building products.

Englert, Inc.
1200 Amboy Avenue
Perth Amboy, NJ 08861
Tel: 732-826-8614
Fax: 732-826-8865
www.englertinc.com
E-mail: info@englertinc.com
Contact name: Mitch Gaber
Other Locations:
Alcoa, TN
Alexandria, VA
Amityville, NY
Danvers, MA
Ft. Lauderdale,FL.
Perth Amboy, NJ
Pittsburgh, PA
Tampa, FL
Wallingford, CT
Substrates:
Aluminum
Thickness (min/max): .0165/.050
Maximum width: 48.50”
Coatings: Various paint systems
Steel
Thickness (min/max): .0080/.0450
Maximum width: 48.5”
Coatings: Various paint systems
Processing capabilities:
Thickness— Aluminum .0175” to .050”; Steel .0120” to .0360”; cut-to-length: Thickness— Aluminum .125” Max; Steel .074” Max; Width 60” Max; Length 22’ Min/12’ Max.
Additional information:
Available for resale: painted aluminum, Galvalume and Galvalume as stock items, copper and terne coated stainless steel can be ordered. Portable roll forming equipment; Portable roll forming equipment; roofing and gutter tools.

Euramax International, Inc.
5445 Triangle Parkway,Suite 350
Norcross, GA 30092
Tel: 770-449-7066
Fax: 770-449-7354
www.euramax.com
E-mail: halbers@amerimaxbp.com
Contact name: Mitch Lewis, President/CEO
Other locations:
215 Phillips 324 Road
West Helena, AR 72390
Tel: 870-572-5074

1411 North Daly Street
Anaheim, CA 92806
Tel: 714-563-8260

Industrieweg 6
JG Roermond NL
The Netherlands 6045
Tel: 31-475-370303

Brunel Road, Earlstrees Industrial Estate
Corby, Northants, NNI7 4JW United Kingdon
Tel: 44-1536-400800

450 Richardson Drive Lancaster, PA 17603
Tel: 717-299-3711
Substrates (Corby, Northants, UK):
Aluminum
Thickness (min/max): .016/.072
Maximum width: 60”
Coatings: Paint
Steel
Thickness (min/max): .012/.028
Maximum width: 60”
Coatings: Paint
Processing capabilities:
Euramax International, Inc. is a full service coating operation with facilities capable of painting, slitting, and fabricating steel and aluminum.
Additional information:
Euramax International, Inc’s. coating operations are
strategically placed on the East and West coasts and center of the U.S. Additionally, Euramax has coating facilities in place to cover the European markets. For coating requirements please contact Heath Albers 870-572-5074 ext. 224 or halbers@amerimaxbp. com
Substrates (Anaheim, CA)
Aluminum
Thickness (min/max): .012/.042
Maximum width: 36”
Coatings: Paint
Substrates (West Helena, AR)
Aluminum
Thickness (min/max): .010”/.060”
Maximum width: 56”
Coatings: Paint
Steel
Thickness (min/max): .009/.019
Maximum width: .009-.015-48; .016- .019-43
Coatings; Paint
Substrates (Lancaster, PA)
Aluminum
Thickness (min/max): .010/.040
Maximum width: 18”
Coatings: Paint
Steel
Thickness (min/max): .010/.020
Maximum width: 18”
Coatings: Paint
Substrates (Roermond, The Netherlands)
Aluminum
Thickness (min/max): .010/.066; .012/.060
Maximum width: 102”
Coatings: Laminates/paint
Steel
Thickness ( min/max): .010/.066; .008/.032; .007/.125
Maximum width: 60”; 60”; 72”
Coatings: Laminates/paint

Euramax Coated Products BV
Industrieweg 6
6045 JG Roermond, NL
Tel: 0475-370303
Fax: 0475-323923
www.euramax.nl
E-mail: rdresen@euramax.nl
Contact name: R. Dresen, Managing Director
Substrates:
Aluminum
Thickness (min/max): 0.3/1.5 mm
Maximum width: 2650 mm
Coatings: PE, PVDF
Steel
Thickness (min/max): 0.4/0.8 mm
Maximum width: 1600 mm
Coatings: PE, PU
Processing capabilities:
Three paint lines: Aluminum up to 1600 mm; aluminum up to 2650 mm, Décor line for striping and decor. Additional information:
Other capabilities: slitting, embossing, cut-to-length, profiling, Part of Euramax International Atlanta, USA.

Euramax Coated Products Limited
Brunel Road
Earlstrees Industrial Estate
Corby, Northants NN17 4JW England
Tel: 044-1536-400800
Fax: 044-1536-400427
www.euramax.co.uk
Email: rdresen@euramax.nl
Contact: Rob Dresen, Managing Director
Substrates (Corby, Northants, England)
Aluminum
Thickness (min/max): 0.3mm/2.0mm
Maximum width: 1530mm
Coatings:PE, PVDF, PU
Steel
Thickness (min/max): 0.4mm/0.9mm
Maximum width: 1530mm
Coatings: PE,PVDF, PU
Additional Information:
other capabilities; slitting and embossing, cut-tolength, profiling (fabrication shop).

First American Resources Company
2030 Riverview Industrial Drive
Mabelton, GA 30126
Tel: 404-355-5000
Fax: 404-696-9320
E-mail: jvrchoticky@farcllc.com
Contact name: Jeremy Vrchoticky, Chief Business Development Officer
Substrates:
Aluminum
Thickness (min/max): .008/.050
Maximum width: 28”
Coatings: Paint
Steel
Thickness (min/max): .005/.050
Maximum width: 28”
Coatings: Paint
Processing capabilities:
Offer package or toll pricing for coated aluminum and steel coil with in-house slitting down to 0.5” wide. Also offer stripe coating.

Galsheet Kenya Ltd—“Resincon” Division
Old Mombasa Road
Nairobi, Kenya
Tel: 254 2 823921/2; 254 150 22491/2
Fax: 254 2 823974; 254 150 22363
www.galsheet.com
E-mail: ASHOK@galsheet.com
Contact name: Ashok C. Ruparelia, Divisional Manager

Gentek Building Products
11 Cragwood Road
Woodbridge, NJ 070001
Tel: 732-827-2338
Fax: 732-827-2320
www.gentekinc.com
E-mail: bill_vallier@gentek.ca
Contact name: William Vallier, Technical Manager
Other locations:
2501 Trans Canada Highway
Pointe-Claire, Quebec Canada H9R 1B3
Tel: 514-426-7801
Fax: 514-426-7800
Substrates:
Aluminum
Thickness (min/max): .011/.032
Maximum width: 32.5”
Coatings: Paint
Steel
Thickness (min/max): .011/.017
Maximum width: 27”
Coatings: Paint
Processing capabilities:
Coating of aluminum and steel with plastisols, polyesters, fluorocarbons, etc., slitting and embossing

Hanna Steel Corporation
4527 Southlake Parkway
Hoover, AL 35244
Tel: 205-820-5200
Fax: 205-820-5248
www.hannasteel.com
E-mail: rdebusk@hannasteel.com
Contact name: Russell DeBusk
Other locations:
220 Hanna Drive
Pekin, IL 61554
Tel: 309-478-3800
Fax: 309-478-3810
Substrates:
Steel
Thickness (min/max): .028/.200
Maximum width: 60”
Coatings: Paint, Dry Lube
Processing capabilities:
In-line HCL acid pickling, surface pretreatment, continuous coat paint systems, dry film lubricant coatings, two-sided—high speed—reverse roll coaters. Hanna Steel processes hot roll, cold rolled and galvanized steel and aluminum. The unique Hanna process also features induction cured polymerization for a more durable coating. Additional information:
Slitting for all gauges of P&O, dry lube coated and painted steel produced on the Hanna Steel paint lines. Hanna performs testing to meet product standards specified by ASTM and National Coil Coating Association. Delivery available on the Hanna Truck Line fleet.

Metalloberflachenveredelung GmBH
Moeddinghofe 31
D-42279 Wuppertal, Germany
Tel: +49 (0) 202 64778-0
Fax: +49 (0) 202 64778-69
www.huehoco.de
E-mail: h.becker@huehoco.de
Contact name: Chris Koslowski, General Manager, Sales Division
Substrates:
Aluminum
Thickness (min/max): 0.10mm/2.00mm
Maximum width: 540mm
Coatings: Laminates/paint
Steel
Thickness (min/max): 0.10mm/1.80mm
Maximum width: 540mm
Coatings: Laminates/paint
Other
Thickness (min/max): 0.10mm/2.00mm
Maximum width: 540mm
Coatings: Laminates/paint
Processing capabilities:
Three coating lines, one with an electrolytic zinc coating line combined. All lines have a degreasing section. Coatings: from decorative (curtain rails and hanging rods, etc.) to office equipment (gold and white coatings), to technical applications, such as bonding agents for PP, PVC, NBR, etc., up to rubber coatings. All of them can be applied on a single or on both sides with one or two layers of coating with only one time going through the coating lines. We cut the coils into widths of min 3mm, either as rings or if required stackered winded on paper cores or drums ranging from 50 kg of up to 2 tonnes. The length of the strip can go up to 100 km.
Additional information:
We also operate two cold rolling mills. We apply different kinds of welding, so that the customers can use endless stripes in their production process. Major market is the weather-strip and sealing industry within the car manufacturing industry. We also deliver precoated stamped parts to our clients.

Jupiter Coil Coating
205 E. Carey Street
Fairland, IN 46126
Tel: 317-835-2247
Fax: 317-835-0610
www. jupiteraluminum.com
E-mail: jupiteraluminum.com, Rnuckles@ jupiteraluminum.com
Contact name: Ron Nuckles, General Manager
Other locations:
1745 165th Street
Hammond, IN 46320
Tel: 219-932-3322
Substrates:
Aluminum Thickness (min/max): .010/.050
Maximum width: 38 ½”
Coatings: Paint
Processing capabilities:
Jupiter Coil Coating paints, slits and packages material to each customers specifications.
Additional information:
Jupiter Coil Coating serves the building products market, R.V. producers and license plate providers.

JW Aluminum—Williamsport Operations
2475 Trenton Avenue
Williamsport, PA 17701–USA
Tel: 800-367-6607, 570-323-4430
Fax: 570-323-6710
www.jwaluminum.com
E-mail: sandrapereira@jwaluminum.com
Contact name: Sandra Pereira (Sales)
Substrates:
Aluminum
Thickness (min/max): .004/.051
Maximum width: 12”
Coatings: Paint
Steel
Thickness (min/max): .004/.051
Maximum width: 12”
Coatings: Paint
Processing capabilities:
slitting, full coating, stripe coating
Additional information:
Capable of applying up to four coatings in a single pass. Capable of full coating process: application of a single color on the total surface of the strip on both sides, if needed, or different colors on each side creating a duplex. Capable of stripe coating process: by-side application of different coatings/colors. Our in-line slitting capabilities allow us to slit prior to coating, which allows for the edges of the strip to be fully coated when needed, as well as after coating.

K.B.P. Coil Coaters Inc.
3600 E. 44th Avenue
Denver, CO 80216
Tel: 303-393-7200
Fax: 303-393-7224
www.kaycan.ca
E-mail: carlkbp1@juno.com
Contact name: Carl Patton
Substrates:
Aluminum
Thickness (min/max): .012/.038
Maximum width: 36.5”
Coatings: Paint
Thickness (min/max): .039/.048
Maximum width: 28.5”
Coatings: Paint, polyester, Kynar, PVC, acrylics
Steel
Thickness (min/max): .010/.020
Maximum width: 36.5”
Coatings: Paint, polyester, Kynar, PVC, acrylics
Thickness (min/max): .021/.024
Maximum width: 24”
Coatings: Paint
Processing capabilities:
Embossing, (stucco directional pattern and cedarwood), slitting, printing non register.

Kawatetsu Galvanizing Co., Ltd.
RESINO Building 3-1-9 Muro-machi, Nihonbashi, Chuoh-ku
Tokyo, Japan 103-0022
Tel: 03(5255)9524
Fax: 03(5255)9539
E-mail: suganuma@resino.co.jp
Contact name: Namio Suganuma, Sr. Managing Director
Substrates:
Steel
Thickness (min/max): 0.11 mm/1.60 mm
Maximum width: 1600 mm
Coatings: Laminates/paint
Processing capabilities: Line speed: max 150 m/min
Additional information:
Further, captive processing; slitting, sheeting, printing, embossing

Kolorkote Nigeria Limited
Industrial Estate, Off Idiroko Road
Ota, Ogun Nigeria
Tel: 234-39-722253, 722602
Fax: +234-39-722712
E-mail: kolkot@linkserve.com.ng
Contact name: G.T. Koshy, Managing Director
Substrates:
Aluminum
Thickness (min/max): .25 mm/1.0 mm
Maximum width: 1250 mm
Coatings: Paint
Steel
Thickness (min/max): .25 mm/1.0mm
Maximum width: 1250mm
Coatings: Paint
Processing capabilities:
The company produces 13,000 MT per annum.
Additional information:
The company can supply double coated product in both aluminum and aluzinc in the above capacity. The company is ISO 9002 certified and has been exporting to various countries for the past eight years.

Material Sciences Corporation
2300 East Pratt Boulevard
Elk Grove Village, IL 60007
Tel: 847-439-2210
Fax: 847-718-8262
www.matsci.com
Contact: Sales & Marketing
Mike Cocanig, VP/General Manager
Tel: 847-718-8035
Email:: mike.cocanig@matsci.com
Contact: Technical
Jim Blanton, Technical Director
Tel: 847-718-8215
Email: jim.blanton@matsci.com
Type of Company:
Coater/Laminator Description: Full service supplier of liquid coilCoatings, film and metal laminates, tension leveling, slitting and embossed plastisol applied to metal substrate for electronics, construction, transportation, appliance, HVAC, F&F and other markets Inquire about thickness and width tolerances. Depending on the line, we can process metal substrates from .006” to .165” thick and from 3” to 54” widths. (wider inquire up to 72”). TS 16949/ ISO 9002, 14001 certified.
General Processing Capabilities& Information
Coil coatings & Adhesives
RoHS compliant systems
Non-Registered printing
Film laminating
Metal composite laminating
Embossing of paint & metal
Slitting
Tension & roller leveling
Stretch wrapping
Electro Galvanizing
Rail access (shipping & receiving)
Cut-to Length (inquire)
Metals: Aluminum
TMBP/CRS/HRS
HDG
EG
TFS/ECCS
SS
ALST
Galvanealed
Galvalume
ETP/TCS
Zn Ni
Zinc

Metal Coaters® and Metal Prep®
Locations:
Rancho Cucamonga, CA
Jackson, MS
Marietta, GA
Middletown, OH
Toll Free: 800-841-4565
Email sales@metalcoaters.com
www.metalcoaters.com
Principal Products/Services
As one of the largest toll processing coil coating companies In the U.S. , Metal Coaters® has been providing coil coating solutions to various industries for more than 25 years. Metal Coaters uses state-of-the-art techniques to clean pre-treat, and roll-apply organic coatings in a continuous process on HDG, galvannealed, Galvalume®, cold rolled, electro-galvanized steel and aluminum coils. As a full service coil coater, Metal Coaters offers a complete line of coating Finishes including polyesters,SMP, fluorocarbons (PVDF) and plastisol (PVC). Coatings are available for interior or exterior and for warranted applications. Additional Metal Coaters has slitting and embossing capabilities performed separate from the coil coating processes on dedicated lines.
Metal Coaters specializes in the conversion of manufacturers from their inefficient post-painted processes to the use of highly efficient and environmentally friendly prepainted metal. When this opportunity arises, a dedicated supply chain team is created to identify the customer’s needs and to engineer coating systems that meet their specific requirements. As an added benefit, Metal Coaters offers access to electronic data interchange (EDI), and coil tracker, an internet-based inventory management information system that allows customers to easily manage their pre-painted metal.

Porcelen Ltd. Ct. LLC
P.O. Box 6303
Hamden, CT 06517
Tel: 203-248-6346
Fax: 203-248-8489
E-mail: MWalsh@specrail.com
Contact name: Mike Walsh
Substrates:
Steel
Thickness (min/max): .008/.020
Maximum width: 21”
Coatings: Paint
Additional information:
New state-of-the-art equipment with curing ovens up to 800 degrees F. Specialty coatings and applications where high quality is essential and will be our strength.

Precoat Metals Division of Sequa Corp.
1310 Papin Street – 3rd Floor
St. Louis, MO 63103
Tel: 314-436-7010
Fax: 314-436-7050
www.precoatmetals.com
E-mail: kelly_garbin@precoat.com
Contact name: Kelly Garbin, Director of Marketing and Product Development
Facility Locations:
Armorel, AR
5888 County Road
East Blytheville, AR 72315
Tel. 870-762-6838
Substrates:
Steel (min/max) 0.010”/0.070”
Aluminum: Inquire

Baltimore, MD
6754 Santa Barbara Court
Elkridge, MD 21075
Tel: 410-796-4770
Substrates:
Steel: (min/max) 0.007”/0.064”
Aluminum (min/max) 0.018”/0.070”

Birmingham, AL
3399 Davey Allison Blvd.
Hueytown, AL 35023
Tel: 205-744-3200
Substrates:
Steel: (min/max) 0.010”/0.070”
Aluminum (min/max) 0.025”/0.090”

Granite City, IL
25 Northgate Industrial Drive
Granite City, IL
Tel:618-451-0909
Substrates:
Steel (min/max) 0.008”/0.045”
Aluminum: Inquire

Greenfield, IN
1950 East Main Street
Greenfield, IN 46140
Tel: 317-462-7761
Substrates:
Line #1
Steel (min/max) 0.007”/0.045”
Aluminum (min/max) ).0.016”/0.045”
Line #2
Steel (min/max) 0.007”/0.060”
Aluminum (min/max) 0.016”/0.061”

Hawesville, KY
2604 River Road
Hawesville, KY 42348
Tel: 270-927-8861
Substrates
Steel (min/max) 0.010”/O.050”
Aluminum: Inquire

Houston, TX
16402 Jacintoport Blvd
Houston, TX 77015
Substrates
Steel (min/max) 0.008”/0.048”
Aluminum Inquire

Jackson, MS
1095 Mendell Davis Dirve
Jackson, MS 39272
Tel: 601-372-0325
Substrates:
Steel (min/max) 0.008”/0.057”
Aluminum (min/max) 0.020”/0.080”

Kingsbury, IN
858 East Hupp Road
LaPorte, IN 46350
Tel: 210-393-3561
Substrates:
Steel: (min/max) 0.012”/0.112”
Aluminum: Inquire

Midwest Metal Coating
9 Konzen Court
Granite City IL 62040
Tel: 618-451-2971
Substrates
Steel (min/max) 0.024”/0.120”
Aluminum (min/max) 0.030”/0.160”

Portage, IN
6300 U.S, Highway 12
Portage, IN 46368
Tel: 219-763-1504
Substrates
Steel (min/max) 0.008”/0.063”
Aluminum (min/max) 0.014”/0.70”

St. Louis, MO
4301 South Spring Ave.
St. Louis, MO 63116
Tel: 314-362-8000
Substrates
Line 1
Steel: (min/max) 0.004”/0.020”
Aluminum (min/max) 0.007”/0.040”
Line 2
Steel: (min/max) 0.004”/0.050”
Aluminum (min/max) 0.007”/0,070”

Weirton, WV
4502 Freedom Way
Weirton, WV 26062
Tel: 304-748-1557
Substrates:
Steel (min/max) 0.009”/0.057”
Aluminum (min/max) 0.018”/0.071”

Prior Coated Metals, Inc.
2233 26th Street, S.W.
Allentown, PA 18103-6699
Tel: 610-797-5200
Fax: 610-797-7041
www.priorcoatedmetals.com
E-mail: lfrank6603@aol.com
Contact name: Len Frank, Director of Sales- Business Development
Substrates:
Aluminum
Thickness (min/max): .015”/.085”
Maximum width: 50”
Coatings: Paint
Steel
Thickness (min/max): .006/.060
Maximum width: 52”
Coatings: Paint
Processing Capabilities:
Base metal, coating and slitting or toll coating and/or slitting. Additional information: Aluminum, cold rolled steel, electro-galvanized steel, electro tin plate, tin mill black plate, hot dipped galvanized steel bare or coated with any of these coatings.: acrylic, alkyds, epoxies, fluorocarbons, phenolics, plastisols, polyesters, silicone polyesters, vinyls.

Rudolf Wiegmann Metallcolor GmbH Industriegebiet Ost
49593 Bersenbrueck, Germany 49593
Tel: ++49/5439/950-0
Fax: ++ 49/5439/950-100
www.wiegmann-gruppe.de
E-mail: ralf.wiegmann@wiegmanmngruppe. de
Contact name: Ralf Wiegmann
Substrates
Aluminum
Thickness (min/max): 0.5/2.0 mm
Maximum width: 1500 mm
Coatings: Polyesters, powder coating
Steel
Thickness (min/max): 0.4/1.5 mm
Maximum width: 1500 mm
Coatings: Polyester/powder coating
Processing capabilities:
First powder coil coating line in Germany
Additional information:
We are coating only the top side of the material. We can also coat panels and profiles on the coil coating line.

Sheng Yu Steel Co., Ltd.
11 Chung Lin Road
Hsiao Kang, Kohsiung, 812
Taiwan, R.O. C.
Kaohsiung, Taiwan 812
Tel: 886-7-8715565
Fax: 886-7-8720067, 886-7-8717592
www.syg.com.tw
E-mail: export@sales.syg.com.tw
Contact name: Mr. Vernon Wang, Section Chief
Substrates:
Steel
Thickness (min/max): 0.21 mm/2.3 mm
Maximum width: 1250 mm
Coatings: Laminates/paint
Processing capabilities:
Galvanized line production annual capacity over 450,000 MT. Color coated line production annual capacity over 100,000 MT. This has increased to over 200,000 MT. Additional information: Major applications: construction, electric appliance, transportation, furniture, agriculture and others.

Sidc Metal Coatings Co. Ltd.
Bahra-Old Makkah Road Kilo 40
P.O. Box 21040
Jeddah, Saudi Arabia 21446
Tel: 00966-2-4320202
Fax: 00966-2-4320308
www.smcmetalcoat.com
E-mail: jambi@smcmetalcoat.com
Contact name: Fadel Jambi, Executive Director
Substrates
Steel
Thickness (min/max): 0.3/0.85
Maximum width: 1250 mm
Coatings: Paint
Processing capabilities:
Maximum speed 75 m/min; Chem-coating pretreatments; prime and finish coating two sides.

Steel Dynamics Inc.
Flat Roll Division
4500 County Road 59
Butler, IN 46721
Tel: 800-799-8942
Fax: 260-868-8950
www.steeldynamics.com
Contact: Don Switzer E-mail: don.switzer@steeldynamics.com

Steel Plants
SDI Flat Rolled Division:
4500 County Road 59
Butler, IN 46721
Substrate
Steel
Thickness (min/max): .012”/.071”
Width: (min/max): 40”/61”
Coatings: polyesters, siliconized polyesters, Kynars,urethanes, epoxies, and acrylics.
Processing capabilities:
SDI provides pre-painted hot rolled, cold rolled, and galvanized steel from our Butler location. All products are tensioned leveled.
SDI Flat Rolled Division
5134 Loop Road
Jeffersonville, IN 47130
Substrate:
Steel
Thickness (min/max): 010” / .045”
Width (min/max): 36”/61”
Coatings: polyesters, siliconized polyesters, Kynars, urethanes, epoxies and acrylics.
Processing capabilities:
SDI provides prepainted galvanized and Galvalume steel from our Jeffersonville location. All products are tensioned leveled.
Additional Information:
SDI is a fully integrated steel company that provides bare and pre-painted products to the door, construction, appliance, HVAC, transportation, and furniture industries. All products are fully LEEDS qualified and available with state-ofthe- art coating technology. All facilities are ISO 9001:2000 certified.

Steelscape, LLC.
222 West Kalama River Road
Kalama, WA 98625
Tel: 360-673-8324
Fax: 360-673-8250
E-mail: scott.cooley@steelscape.com
Contact name: Scott Cooley, Vice President, Sales/Marketing
Other locations:
11200 Arrow Route
Rancho Cucamonga, CA 91730
Tel: 909-987-4711
Fax: 909-989-4470
Substrates (Kalama)
Steel – Bare
Thickness (min/max): .010”/.047”
Width (min/max): 26”/51”
Coatings: Galvanized – TruZinc®
Steel – Painted
Thickness (min/max): .0115”/.0359”
Width (min/max): 26”/51””
Coated: Painted
Substrates (Rancho)
Steel – Bare
Thickness (min/max): .012”/.0356”
Width (min/max): 26”/50”
Coatings: Galvalume – Z-NAL®
Steel – Painted
Thickness (min/max): .008”/.046”
Width (min/max): 24”/58”
Coatings: Painted
Substrates (Fairfield)
Steel –Painted
Thickness (min/max): .014”/ .045”
Width (min/max): 24”/50”
Coatings — Painted
Processing capabilities:
Our Kalama, WA facility includes a pickle line, cold mill, metallic coating line, paint line, slitter and cut-to-length line. Our Rancho Cucamonga, CA facility includes a metallic coating line, paint line, slitter and embosser. Additional information:
We offer products in a variety of combinations: bare or painted, passivated, oiled, chemically treated, resin-coated, etc. in a wide range of thicknesses, widths, grades and coating weights.

Ternium
2500 Ron Bean Boulevard
Shreveport, LA 71115
Tel: 713-963-4400
Fax: 713-963-4488
www.ternium.com
Contact name: Mike Guhl, Commercial Manager
Substrates
Steel (Galvanized, 55% Aluminum, Cold Rolled Annealed)
Thickness (min/max): 0.010”/ 0.045” (0,25mm/1.14mm)
Width (min/max: 24”/ 54” (610mm/1372mm)
Entry coil weight: 55,000lbs. (25 metric tons)
Exit coil weight: 26,500 lbs. (12 metric tons)
Entry diameters (ID/OD): 20” & 24”/84” (508mm & 610mm/2134mm)
Delivery diameters (ID/OD): 20”/ 58” (508mm/1472mm)
Coatings: Paint (polyesters, siliconized polyester, fluorocarbon, acrylic) and zinc phosphate).
Other Processing Capabilities:
Shreveport, LA facility also includes a double-pot metallic coating line (galvanizing/55% aluminum) as well as a slitting/embossing line.

Western Metal Decorating
8875 Industrial Lane
Rancho Cucamonga, CA 91730
Tel: 909-987-2506
Fax: 909-989-8189
www.western-metal.com
E-mail: info@western-metal.com
Contact name: Karen Buchanan, Plant Manager
Substrates
Aluminum
Steel—-CR, HDG, Galvalume
Other — Stainless, Copper, Tinplate, Black plate
Substrate
Thickness (min/max): .006/.050
Maximum coating width: 25”
Coatings: Laminates/paint
Processing capabilities:
One or two sided interior/exterior laminates. Bright gold and silver mylar films. Primer/topcoat with full coat or wash reverse; topcoat/clear with full coat or wash reverse. Polyesters, epoxies, SMPs, Kynars, vinyls and acrylics. Light gauge cut-to-length up to 44” long x 36” wide. Full slitting capabilities to 48” wide. On and off, trans loading and storage— 30,000 lb maximum coil weight is available with two docks to accommodate four railcars at a time.
Additional information:
We apply food grade coatings for the container industry on our three sheet fed lines and have full four color press printing capability for other sheet fed printing projects. Our facility is housed on five acres with two buildings totaling 100,000 sq. ft. under roof. We are ISO 9001/2000 Certified and Lean Manufacturing Trained. Duration in Business—56 years

Wismarq Corporation
930 Armour Road
Oconomowoc, WI 53066
Tel: 262-567-1112
Fax: 262-567-8289
www.wismarq.com
E-mail: info@wismarq.com
Contact name: Roger Sieja
Substrates:
Aluminum
Thickness: (min/max) 0.008”/0.045”
Width (min/max): 2”/20”
Steel
Thickness (min/max) 0.006”/0.040”
Width (min/max) 2”/20”
Other locations:

11440 Addison Avenue
Franklin Park, IL 60131
Tel: 847-455-7200
Fax: 847-455-7608
Substrates:
Aluminum
Thickness (min/max) 0.008”/0.050”
Width (min/max) 10”/27.5”
Steel
Thickness (min/max) 0.006”/0.040”
Width (min/max) 10”/27.5”

125 McFann Road
Valencia, PA 16059
Tel: 724-898-1511
Fax: 724-898-3355
Substrates:
Aluminum
Thickness (min/max): 0.008”/0.045”
Width: (min/max) 10”/38”
Steel
Thickness (min/max) 0.008”/0.024”
Width (min/max) 10”/38”

200 Conalco Drive
Jackson, TN 38301
Tel: 731-422-3605
Fax: 731-422-3606
Substrates
Aluminum
Thickness (min/max): 0.008”/0.050”
Width (min/max) 22”/56”
Steel
Thickness (min/max): 0.008”/0.030”
Width (min/max) : 22”/56”
Processing capabilities:
Oconomowoc, WI – slitting to 50”, non- register printing; Franklin Park, IL – slitting to 50”. Embossing, nonregister printing; Valencia, PA – slitting to 72”, non-register printing; Jackson, TN – slitting to 72”, non-register printing, embossing.
Additional information:
A wide variety of coatings can be applied in single or double coat applications including epoxies, polyesters, acrylics, plastisols, fluorocarbons, adhesives, conversion coatings, lubricants, oranisols and vinyls.

Zegers Inc.
16727 Chicago Avenue
Lansing, IL 60438
Tel: 708-474-7700
Fax: 708-474-7704
E-mail: whz@zegers-inc.com
Contact name: William Zegers
Substrates
Aluminum
Thickness (min/max): .005/.040”
Maximum width: 32”
Coatings: Paint/laminates
Steel
Thickness (min/max): .004/.030”
Maximum width: 32”
Coatings: Paint/laminates
Processing capabilities:
coil coating and slitting on both aluminum and steel. Slitting capabilities include entry coil weight of 6,000 pounds, with entry coil I.D. from 16”to 20” and exit coil I.D. from 18” to 20”.
Additional information:
Coatings include polyester, epoxy, acrylic, vinyl, adhesives and others. Laminates include vinyl, mylar and tedlar. All inbound coils must be skid loaded, eye to the sky, fork truck rear unload. All outbound material will be skidded and rear loaded. Side unload available on outbound material upon request.